師資成員 -吳鳳科技大學 電機工程系
培育雲端化介面技術與智動化技術人才的專業系所

---

期刊論文(Journal Paper)

1. Chen, QD, Shyu, SH, Li,WL, 2020, “An Overlapped Electrical Double Layer Model for Aqueous Electrolyte Lubrication with Asymmetric Surface Electric Potentials,” Tribology International, 106283
2. Li, W-L, Huang, Z-H, Lin, C-S, Chen, T-H, Shyu, S-H*, 2019,“On the Linear Stability Analysis of Journal Bearings–Consideration of Coupled Effects of Anisotropic Slip and Surface Roughness,” Tribology International, Vol. 137, pp.254—266 (SCI, EI) (MOST 103-2212-E-006-050-MY3)
3. Shyu, S.-H.*, Hsu, W.C., 2018, “A Numerical Study on the Negligibility of Cross-Film Pressure Variation in Infinitely Wide Plane Slider Bearing, Rayleigh Step Bearing and Micro-Grooved Parallel Slider Bearing,” International Journal of Mechanical Sciences, Vol. 137, pp.315-323 (MOST 102-2221-E-274-003,MOST 103-2221-E-274-001) (SCI, EI) (Cited=6/Self Cited=0)
4. Shyu S.H.*, Yu Wei Chen, 2017, “Dynamic Characteristics ofRotor-Bearing System with a Labyrinth Seal,” Key Engineering Materials,Vol.739, pp. 169-181 (EI)
5. Shyu, S.-H.*, Lee, W-R., Hsieh, S.-J., and Liang, S.M., 2012, “Static Performance Characteristics of Finite-Width Turbulent Journal Bearings with THD Effect,” STLE Tribology Transactions, Vol.55, pp.302-312(NSC91-2212-E-274-002 and NSC 92-2212-E-274-003) (SCI, EI) (Cited=10/Self Cited=0)
6. Shyu, S.-H*, Liang, S.-M. and Lin, C.-M., 2012, “A General Thermohydrodynamic Lubrication Model for Laminar, Transitional and Turbulent Slider Bearings,” Advanced Science Letters, Vol. 8, pp.534-539(NSC94-2212-E-274-001 and NSC 95-2221-E-274-007) (SCI, EI) (Cited=1/Self Cited=0)
7. Lin, C. M., Cheng, C. H., Shyu, S. H., Lee, Y. C., Uang, K.M. and Chen, T. M., 2012, “Filling Imbalances Analysis of Multi-Cavity Injection Molding Based on the Taguchi Method,” Advanced Science Letters, Vol. 8, pp.529-533 (NSC 99-2221-E-274-003 and NSC 100-2626-E-274-001-MY2) (SCI,EI) (Cited=1/Self Cited=0)
8. Shyu, S.-H* and Liu, J.-H. 2011, “Standing-Wave Thermoacoustic Refrigerator without Heat Exchanger,” Journal of WuFeng University,Vol.19, pp. 163-170 (NSC 98-2622-E-274-002-CC3)
9. Shyu, S.-H., 2011, “Implementation of CFD to Complex Hydrodynamic Lubrication Flow,” Journal of WuFeng University, Vol.19, pp. 151-162
10. Shyu, S.-H* and Chen, Y.-T., 2011, “Checkerboard Phenomenon in Pressure Distribution in a Slider Bearing,” Journal of WuFeng University, Vol.19,pp. 139-150
11. Shyu, S.-H.*, Li, F., Jeng, Y.-R., Lee, W-R. and Hsieh, S.-J., 2010,“THD Effects of Static Performance Characteristics of Infinitely Wide Turbulent Journal Bearings,” STLE Tribology Transactions, Vol. 53, pp. 948-956,(NSC 90-2212- E-274-001, NSC 92-2212-E-274-003) (SCI, EI) (Cited=12/Self Cited=1)
12. Jeng, Y-R Jeng, Chiu, S-M, Huang, P-Y, and Shyu, S-H,2010, “Investigation of Thermosonic Wire Bonding Resistance of Gold Wire Onto Copper Pad,” IEEE Transactions on Electronics Packaging Manufacturing,Vol. 33, No. 1, pp.65-70 (SCI, EI) (Cited=6/Self Cited=0)
13. Shyu, S.-H.*, Jeng, Y.-R., and Li, F., 2008, “A Legendre-Collocation Method for Thermohydrodynamic Journal Bearings with Elrod's Cavitation Algorithm,” Tribology International, Vol. 41, No. 6, pp. 493-501 (NSC90-2212- E-274-001) (SCI, EI) (Cited=20/Self Cited=3)
14. Shyu, S.-H.*, Jeng, Y.-R. and Chang, C.-C., 2006, “Load Capacity for Adiabatic Finite-Width Plane Slider Bearings in the Turbulent Thermohydrodynamic Regime,” STLE Tribology Transactions, Vol. 49, No. 1,pp. 26-32 (NSC 91-2212-E-274-002) (SCI, EI) (Cited=7/Self Cited=2)
15. hyu, S.-H.*, 2006, “The Parameters for THD Lubrication Flow,” Journal of Mechanics, Vol. 22, No. 1, pp. 19-26 (SCI, EI)
16. Liang, S.-M., Chung, W.-T., Chen, H., and Shyu, S.-H., 2005,“Numerical Investigation of Reflected Shock/Vortex Interaction near an Open-Ended Duct,” AIAA Journal, Vol. 43, No. 2, pp. 349-356 (SCI, EI)(Cited=6/Self Cited=2)
17. Jeng, Y.-R., Chen, C.-C., Lai, H.-F., and Shyu, S.-H.,2005, “Lubrication Rheology for Ultra-Thin Polymer Solutions: A Molecular Dynamics Study,” Journal of the Chinese Society of Mechanical Engineers, Vol. 26, No. 2., pp. 155-161 (EI, SCIE)
18. Jeng, Y-R, Chen, C-C, and Shyu, S.-H., 2004,"Concentration Effects on Lubrication Rheology for Polymer Solution in Molecularly Thin Film Using Molecular Dynamics," Journal of Applied Physics, Vol. 95, No. 12, pp. 8450-8455 (SCI, EI) (Cited=4/Self Cited=0)
19. Jeng, Y.-R., Lin, Z.-W., and Shyu, S.-H., 2004, ''Changes of Surface Topography during Running-in Process,'' ASME Journal of Tribology, Vol. 126, No. 3, pp. 620-625 (NSC 87- 2212-E-194-015.) (SCI, EI) (Cited=69/Self Cited=4)
20. Shyu, S.-H.*, Jeng, Y.-R. and Chang, C.-C., 2004, “Load Capacity for Adiabatic Infinitely-Wide Plane Slider Bearings in the Turbulent Thermohydrodynamic Regime,” STLE Tribology Transactions, Vol. 47, No. 3,pp. 396-401. (NSC 89-2218-E-274-001) (SCI, EI) (Cited=14/Self Cited=3)
21. Jeng, Y-R, Chen, C-C, and Shyu, S.-H., 2003, "A Molecular Dynamic Study of Lubrication Rheology of Polymer Fluids," Tribology Letters, Vol. 15, No. 3, pp. 293-299 (SCI, EI) (Cited=25/Self Cited=4)
22. Jeng, Y.-R. and Shyu, S.-H., 2002, "Influences of Valve Lifter Foot Surface Treatment, Surface Texture and Rotation on Wear," Wear, Vol. 252, pp. 1016-1019 (SCI, EI) (Cited=2/Self Cited=0)
23. Jeng, Y.-R., Lin, Z.-W., and Shyu, S.-H., 2002, ''A Microscopic Wear Measurement Method for General Surfaces,'' ASME Journal of Tribology, Vol. 124, No. 4, pp. 829-833 (SCI, EI) (Cited=15/Self Cited=3)
24. Shyu, S.-H.*, and Jeng, Y.-R., 2002, ''An Efficient General Fluid-Film Lubrication Model for Plane Slider Bearings,'' STLE Tribology Transactions, Vol. 45, No. 2, pp. 161-168. (NSC 89-2218-E-274-001) (SCI, EI) (Cited=16/Self Cited=8)
25. Shyu, S.-H., Talmage, G., and Carpino, M., 2000, ''Comparison of Lubrication Models for Plane Slider Bearings,'' STLE Tribology Transactions, Vol. 43, No. 1, pp. 74-81. (SCI, EI) (Cited=11/Self Cited=8)

參與研究計劃名稱